![background image](http://html1.mh-extra.com/html/panasonic/kx-tda30/kx-tda30_manual_3660595058.webp)
4.5 Registering IP Proprietary Telephones
4.5.1 Registering the IP-PTs
After the programming of both the IP-EXT card and IP-PT is finished, the IP-PT must be registered to the PBX.
This is done by using the Maintenance Console.
Registration
1.
a.
Under
Configuration
, click
Slot
.
b.
Move the mouse pointer over the IP-EXT card. A menu
will be shown under the mouse pointer.
c.
Click
Port Property
.
2.
Click
Registration
.
A dialogue box will appear. Non-registered (available) ex-
tension numbers are displayed on the left.
3.
a.
Highlight numbers and click the right arrow to select
them for registration.
b.
Click
Next
. A screen will appear with information on the
current IP-PT extension number and index number for
programming.
c.
Click
Next
.
•
If the registration is still in progress, the dialogue box
will show "Waiting for IP-PT to register…". Click
OK
.
•
If the registration is successful, the dialogue box will
show "Registration Succeed". If there are more
IP-PTs to be registered, click
Continue
to resume
or
Cancel
to terminate the registration. If not, click
Close
.
Once the IP-PT is successfully registered, the status of the IP-PT will update to show "Registered".
58
Information about IP Proprietary Telephones
4.5.1 Registering the IP-PTs
Summary of Contents for KX-TDA30
