KX-NT321
To end programming
The IP-PT will reboot
and establish connection
to the network.
After assigning
the IP addresses
Select "QoS".
Press SP-PHONE.
Select "VLAN".
Press SP-PHONE.
Press STORE.
Press HOLD three
times to return to the
Menu screen.
Select "VLAN (Enable)".
Press SP-PHONE.
VLAN ID
VLAN Priority*
1
To set the VLAN ID for the primary port
0–7
1–4094
Select "Priority".
Select "VLAN (Primary)".
Press SP-PHONE.
Select "VLAN ID".
Press SP-PHONE.
To set the VLAN ID for the secondary port
VLAN ID
VLAN Priority*
1
1–4094
0–7
Select "VLAN (Secondary)".
Press SP-PHONE.
Select "VLAN ID".
Select "Priority".
Press SP-PHONE.
Press SP-PHONE.
*1
The VLAN priority of the primary port must be set higher than the priority of the secondary port. The larger the number, the higher
the priority.
48
Information about IP Proprietary Telephones
4.2.2 Setting the VLAN Parameters
Summary of Contents for KX-TDA30
