KX-NT265
IP Address*
1
Subnet Mask Address*
2
Default Gateway Address*
3
To set the IP address of the IP-PT
To set the subnet mask address
To enter the IP address of the IP-EXT card (PBX IP Address)
To start programming
Supply power to the IP-PT.
Press PROGRAM
while "Searching" is displayed.
PROG.
Press VOLUME to
select "Network".
VOL
Press SP-PHONE.
Press VOLUME to
select "DHCP (Disable)".
VOL
Press SP-PHONE
twice.
Press SP-PHONE.
Press VOLUME to
select "Subnet Mask".
VOL
Press SP-PHONE.
Press SP-PHONE.
Press VOLUME to
select "Default GW".
VOL
Press SP-PHONE.
Press SP-PHONE.
Press HOLD
twice to return
to the Menu screen.
HOLD
Press VOLUME
to select "PBX".
VOL
Press SP-PHONE
twice.
Press
SP-PHONE.
To the VLAN settings
The IP-PT will reboot
and establish connection
to the network.
To end programming
To set VLAN parameters
OR
Press STORE.
PBX IP
Address
Press HOLD
to return to the
Menu screen.
HOLD
To set the default gateway address (if required)
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3
Valid IP address range: "1.0.0.0" to "223.255.255.255"
Information about IP Proprietary Telephones
43
4.2.1 Assigning the IP Addressing Information
Summary of Contents for KX-TDA30
