Panasonic KX-TDA30, Manual

Page: 46 / 66

4.2.2 Setting the VLAN Parameters
To establish voice communications between IP-PTs, the primary ports of the IP-PTs and the connected PBX
must belong to the same VLAN. Consult your network administrator and obtain the appropriate VLAN ID.
If you are using an IP-PT with 2 ports, it is possible to place primary and secondary ports on different VLANs
by assigning separate VLAN IDs to each port.
Follow the procedure below for all IP-PTs on the network, using appropriate VLAN IDs.
IP-PTs with a multiline display (e.g., KX-NT300 series [except KX-NT321])
ENTER
VLAN ID
ENTER
VLAN Priority*
1
ENTER
Press "STORE".
STORE
To set the VLAN ID for the primary port
To set the VLAN ID for the secondary port
To end programming
0–7
1–4094 Select "Primary port".
ENTER
VLAN ID
ENTER
VLAN Priority*
1
ENTER 1–4094
Select
"Secondary port (TO PC)".
Select "VLAN Priority". ENTER
Return to the
VLAN setting screen.
ENTER
ENTER
Select
"VLAN Priority". ENTER
Return to the
Menu screen.
Select "VLAN ID".
Select "VLAN ID".
0–7
The IP-PT will reboot
and establish connection
to the network.
Select "VLAN". ENTER Select "Enable" for
VLAN setting.
After assigning
the IP addresses
Select "QoS".
ENTER
KX-NT300 series only
*1 The VLAN priority of the primary port must be set higher than the priority of the secondary port. The larger the number, the higher
the priority.
46 Information about IP Proprietary Telephones
4.2.2 Setting the VLAN Parameters