4.2 Programming the IP Proprietary Telephone
4.2.1 Assigning the IP Addressing Information
When Assigning IP Addresses to IP-PTs Using a DHCP Server
When using a DHCP server to automate IP address assignment of IP-PTs, only the IP address of the
IP-EXT card (PBX IP address) must be entered manually.
Other addresses (i.e., the IP address of the IP-PT, the subnet mask address, and the default gateway address)
will be assigned automatically by the DHCP server.
Follow the procedure below for all IP-PTs on the LAN that a DHCP server is used.
If you need to set VLAN parameters, follow the procedure described in "4.2.2 Setting the VLAN
Parameters" after assigning the IP addresses without ending programming.
36
Information about IP Proprietary Telephones
4.2.1 Assigning the IP Addressing Information
Summary of Contents for KX-TDA30
