Panasonic KX-TDA15 Features Manual Download Page 141

Page: 141 / 420

1.9 Automatic Route Selection (ARS) Features

Feature Guide

141

Carrier Table Assignment

A specified number of carriers can be programmed. Assign the following items for each Carrier Table:

→

3.14.6 [8-5] Carrier—Carrier

Carrier Name

: Assign the carrier name.

→

3.14.6 [8-5] Carrier—Carrier—Carrier Name

→

[350] ARS Carrier Name

Removed Number of Digits

: Assign the number of digits to remove from the beginning of the user-

dialled number.

→

3.14.6 [8-5] Carrier—Carrier—Removed Number of Digits

→

[352] ARS Removed Number of Digits for Carrier Access

Carrier Access Code

: Assign the code to access the carrier.

→

3.14.6 [8-5] Carrier—Carrier—Carrier Access Code

→

[353] ARS Carrier Access Code

Trunk Group :

Assign the trunk groups which connect to each carrier.

→

3.14.6 [8-5] Carrier—TRG 01–TRG 64 (KX-TDA30/KX-TDA100/KX-TDA200), or TRG 01–TRG 96

(KX-TDA600)

→

[351] ARS Trunk Group for Carrier Access

Modify Command :

Assign the commands to modify the dialled number to access the carrier.

→

3.14.6 [8-5] Carrier—Carrier—Modify Command

[Command Explanation]

Command

Description

Number

Add the number.

Add the Carrier Access code.

Analogue Line:

Insert a pause.

ISDN Line:

Insert a pause and change to tone (DTMF) signal.

Add the Authorisation code for a tenant ( ).

Add the Authorisation code for a trunk group ( ).

Add the Itemised Billing code ( ).

Add the dialled number after the digits are removed (Home position).

Summary of Contents for KX-TDA15





































































































































































































































































































































































































































Search results

Summary of Contents for KX-TDA15

Reviews:

Related manuals for KX-TDA15

Brands by name

Popular brands

Panasonic KX-TDA15, Features Manual

Search results

Summary of Contents for KX-TDA15

Reviews:

Related manuals for KX-TDA15

Brands by name

Popular brands