Panasonic KX-TCD961CXB Operating Instructions Manual Download

Page: 63 / 68

Useful Information

Chapter 6

Problem

The unit does not work.

You cannot program function items such
as the time/day adjustment (p. 19).

The battery strength is not displayed
correctly.

“

” flashes or the unit beeps every

15 seconds.

You charged the batteries fully, but
“

” flashes.

The charge indicator (

) light never

goes out while charging.

Remedy

•

Turn the power ON (p. 13).

•

Check the settings (p. 10–15).

•

Charge the batteries fully (p. 12).

•

Clean the charge contacts and charge again (p. 12).

•

Unplug the AC adaptor and turn the power OFF to
reset. Plug in the AC adaptor and turn the power ON.
Then try again.

•

The handset has been canceled or has not been
registered. Register the handset (p. 48).

•

Re-install the handset batteries and try again.

•

Programming is not possible while the unit is in the
talk or intercom mode.

•

Move closer to the base unit.

•

Check that the battery type selection is correct
(p. 57).

•

Charge the batteries fully (p. 12).

•

Clean the charge contacts and charge again (p. 12).

•

Install new batteries (p. 57, 58).

•

This is normal.

General

KX-TCD961CXB(57~68) 99.12.3 2:22 PM Page 63

Summary of Contents for KX-TCD961CXB





































































Search results

Summary of Contents for KX-TCD961CXB

Reviews:

Related manuals for KX-TCD961CXB

Brands by name

Popular brands

Panasonic KX-TCD961CXB, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD961CXB

Reviews:

Related manuals for KX-TCD961CXB

Brands by name

Popular brands