Making Calls
22
To select the receiver volume
3 levels (HIGH, MEDIUM, LOW) are available.
The factory preset is MEDIUM.
While talking, press
F
or
G
to select the
desired level.
•
After a few seconds, the display will return to
the length of the call.
OR
In the stand-by mode, proceed as follows.
1
Press .
2
Press
G
or
F
until “
F6
” is displayed,
then press
.
•
The current level is displayed.
3
Press
F
or
G
to select the desired
level.
4
Press .
OK
F6
To dial after confirming the
entered number
1
Enter a phone number.
•
The entered number is displayed.
•
If you misdial, press
. Digits are
erased from the right.
•
To cancel, press
firmly.
2
Press .
•
After a few seconds, the display will start
showing the length of the call.
3
To hang up, press
or place the
handset on the base unit.
•
The handset will return to the stand-by
mode.
C
C
1
Press .
2
Dial a phone number.
•
The dialed number is displayed.
•
After a few seconds, the display will start
showing the length of the call.
•
If “ ” flashes and an alarm tone sounds
after pressing
, move closer to the
base unit. Then try again.
•
You can choose whether to display the length
of the call or phone number in the talk mode
by programming (p. 33).
3
To hang up, press
or place the
handset on the base unit.
•
The handset will return to the stand-by
mode.
Ex. LOW is selected.
Make sure that the power is ON (p. 13).
i2345678
8888
00-00-00
Ex. LOW is selected.
KX-TCD961CXB(22~27) 99.12.3 2:08 PM Page 22