42
Remote Operation from a Touch Tone Phone
Setting the Remote Code
The remote code prevents unauthorized people from accessing your unit and listening to your
messages. Choose any 3-digit number (000–999). The remote code is not preset.
Make sure that the power is ON (p. 13) and the unit is in the stand-by mode.
Canceling the remote operation
You can prohibit anyone from accessing to your
unit and listening to your recorded messages
remotely. Erase the remote code in the following
way. After this programming, you cannot use the
remote operation functions (p. 43–44).
1
Press then .
2
Press .
•
“
” is displayed on the handset.
•
“
P
” is displayed on the base unit.
3
Press .
4
Press .
•
The display goes out.
5
Press .
•
To cancel, reprogram a new remote code.
1
I N T
1
Press then .
2
Press .
•
“
” is displayed on the handset.
•
“
P
” is displayed on the base unit.
3
Press .
4
Enter a remote code by using a
3-digit number (000–999).
•
The entered number is displayed
on the base unit.
5
Press .
•
A confirmation tone sounds.
•
To change the remote code, repeat from
step1.
•
If 6 beeps sound in step 5, a 3-digit number
was not enterd. Start again from step 1 and
enter a 3-digit number.
•
If a remote code is not programmed, you
cannot use the unit remotely.
1
I N T
KX-TCD961CXB(38~46) 99.12.3 2:18 PM Page 42
