Special Features
26
How to Use the Pause Feature
(For Analog PBX Line/Long Distance Service Users)
We recommend you press
if a pause is required for dialing with a PBX or to access a long
distance service.
Ex: Line access number
(PBX)
➡
➡
Phone number
•
Pressing
once creates a pause.
This prevents misdialing when you redial or dial a stored number.
•
Pressing
more than once increases the length of the pause between numbers.
0
0
1
Press then .
2
Press .
3
Enter the base unit password (p. 29).
•
The factory preset is 0000.
4
Press .
•
The current timing is displayed.
1: 3 seconds 2: 5 seconds
3
3
I N T
5
To select 5 seconds, press
.
OR
To select 3 seconds, press
.
6
Press .
•
A confirmation tone sounds and the
display will return to the stand-by mode.
1
2
Setting the pause timing
You can set the pause timing to 3 seconds or 5 seconds, depending on your PBX requirements. The
factory preset is 3 seconds.
Make sure that the power is ON (p. 13) and the unit is in the stand-by mode.
•
If 5 beeps sound in step 3, the entered
password is incorrect. Enter the correct
password.
Ex. 3 seconds is selected.
33
u
i
KX-TCD961CXB(22~27) 99.12.3 2:08 PM Page 26
