Chapter 1
Preparation
15
Ex. MEDIUM is selected.
Selecting the Base Unit Ringer Volume/Pattern
You can program the desired base unit ringer volume and pattern.
Make sure that the power is ON (p. 13) and the unit is in the stand-by mode.
1
Press then .
2
Press TWICE.
•
The current volume is displayed.
1: LOW 2: MEDIUM 3: HIGH
0: OFF
2
I N T
3
Press the desired volume level
,
,
or .
•
Each time you press a button, the selected
volume is displayed and rings.
4
Press .
•
A confirmation tone sounds and the display
will return to the stand-by mode.
0
3
2
1
22
u
2
Ringer volume
3 levels (HIGH, MEDIUM, LOW) are available.
The factory preset is MEDIUM. When set to
OFF, the base unit will not ring.
1
Press then .
2
Press then .
•
The current ringer pattern is displayed.
3
Press the desired ringer pattern
to
.
•
Each time you press a button, the selected
pattern is displayed and sounds.
4
Press .
•
A confirmation tone sounds and the
display will return to the stand-by mode.
6
1
3
2
I N T
23
U
i
Ringer pattern
You can program the desired handset ringer
pattern (6 patterns). The factory preset is
pattern 1.
Ex. Pattern 1 is selected.
KX-TCD961CXB(06~16) 99.12.3 2:04 PM Page 15
