Panasonic KX-TCD961CXB Page 19 Operating Instructions Manual Download

Page: 19 / 68

Preparation

Chapter 1

Time and Day Adjustment

Voice Time/Day Stamp: During playback, a synthesized voice will announce the time and day that
each message was recorded.

Press then .

Press

•

“

” is displayed on the handset.

•

“

” is displayed on the base unit.

Press .

•

“

” is displayed on the base unit.

•

“

Set time

” is announced.

If previously adjusted, the time/day will be
heard.

Enter the current time (hour and minute)
using a 4-digit number. (Ex. To set 13:30,
enter “1330”.)

•

The entered number is displayed on the
base unit.

Press

repeatedly to set the day.

•

The unit announces the day.

Press .

•

The unit announces the time/day.
The clock starts working.

I N T

If a power failure occurs, the adjusted time/day
will be erased.

•

The accuracy of the clock is approximately
±45 seconds a month at room temperature.

To check the time/day

Press then .

Press .

•

The current time/day is heard. When
finished, press

I N T

KX-TCD961CXB(17~21) 99.12.3 2:06 PM Page 19

Summary of Contents for KX-TCD961CXB





































































Search results

Summary of Contents for KX-TCD961CXB

Reviews:

Related manuals for KX-TCD961CXB

Brands by name

Popular brands

Panasonic KX-TCD961CXB, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD961CXB

Reviews:

Related manuals for KX-TCD961CXB

Brands by name

Popular brands