Panasonic KX-TCD700BX Operating Instructions Manual Download

Page: 7 / 52

➡

Installing the Batteries in the Handset

Battery Strength

You can check the present battery strength on the display.

Battery strength

Fully charged

Medium

Low

No power

Battery icon

(Flashing)

Recharge

When “

” flashes or the unit beeps every 15 seconds, recharge the batteries.

• If the

rechargeable
batteries are not
inserted correctly,
the handset will
not work.

Chapter 1

Battery Information

After your batteries are fully charged:

• Battery life may vary depending on usage conditions, such as:

– when viewing the Caller ID Caller List, and
– ambient temperature.

•

Clean the handset charge contacts with a soft, dry cloth once a month.
Clean more often if the unit is subject to grease, dust or high humidity.

Otherwise the batteries may not charge properly.

• If the batteries are fully charged, you do not have to place the handset on the

base unit until “

” flashes. This will maximise the battery life.

• The batteries cannot be overcharged.

Operation

Ni-MH battery life (Included)

Ni-Cd battery life (optional)

While in use (Talk)

Up to about 20 hours

Up to about 12 hours (based on 800m/A per hour)

While not in use (Standby)

Up to about 160 hours

Up to about 100 hours

Battery Charge

At the time of shipment, the batteries are not
charged. To charge, place the handset on the base
unit. Please charge the batteries for approximately
10 hours before initial use. During charging, the battery icon is as shown above.

31939_KX-TCD700CX_Czech 18/6/01 1:54 pm Page 7

Summary of Contents for KX-TCD700BX

















































Search results

Summary of Contents for KX-TCD700BX

Reviews:

Related manuals for KX-TCD700BX

Brands by name

Popular brands

Panasonic KX-TCD700BX, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD700BX

Reviews:

Related manuals for KX-TCD700BX

Brands by name

Popular brands