Panasonic KX-TCD700BX Operating Instructions Manual Download Page 23

Page: 23 / 52

Paging/Intercom

➡

Paging All Handsets from the Base Unit

Z Ï

(On the Base Unit).

• All handsets will ring for one minute.

2. To stop paging,

Z Ï

again or

Z O

on one of the handsets.

Intercom between Handsets

A 2-way intercom is available between handsets.
Eg.

Handset 1

is paging

Handset 2

1. (Handset 1)

Z N

(Int icon blinks until connection is established).

2. (Handset 1)

Z B

3. (Handset 2)

When the unit rings,

Z O

to answer.

• The intercom duration is displayed.

4. (Handsets 1 and 2)

To end the intercom,

Z P

• Intercom calls can be conducted within the radio area of the

current base unit, but not with units in neighbouring radio
areas.

Intercom cannot be accepted in the following areas:
– when the other party is in intercom mode.
– when the other party is on hold during external call.
– while the other party is in conference call.

Transferring a Call from One Handset to Another

The intercom can be used during a call, enabling you to transfer
a call between handsets registered to the same base unit.

Transferring a Call using the Intercom

Eg.

Handset 1

is transferring an external call to

Handset 2

1. (Handset 1)

During a call,

Z N

(Intercom icon turns on).

• The call is put on hold.

2. (Handset 1)

desired handset no. eg.

• You will hear an internal ring back tone until the other

handset is answered.

-1-

œœœœœœœ

Ï  Ô Ó

(1)

Î Ï

 Ô Ó

(1)-(2)

Î Ï

 Ô Ó

00-00-00

Î Ï

 Ô Ó

(1)

Î Ï 

Ô Ó

(1)-(2)

Î Ï 

Ô Ó

31939_KX-TCD700CX_Czech 18/6/01 1:54 pm Page 23

Summary of Contents for KX-TCD700BX

















































Search results

Summary of Contents for KX-TCD700BX

Reviews:

Brands by name

Popular brands

Panasonic KX-TCD700BX, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD700BX

Reviews:

Brands by name

Popular brands