manualshive.com logo in svg

Panasonic KX-TCD700BX, Operating Instructions Manual

Share
Download
Panasonic KX-TCD700BX Operating Instructions Manual Download Page 47

31939_KX-TCD700CX_Czech  18/6/01  1:54 pm  Page 50

Before Requesting Help 

Problem

Remedy

The unit does not work.

• Turn the power ON (p.12).
• Check the settings.
• Charge the batteries fully (p.7).
• Clean the charge contacts and charge again (p.7).
• Unplug the AC adaptor and turn the power OFF to

reset. Plug in the AC adaptor and turn the power
ON. Then try again.

• The handset has been cancelled or has not been

registered. Register the handset (p.36).

• Re-install the handset batteries and try again.

“

Î

” flashes and an alarm tone 

• You are too far from the base unit. Move closer and

sounds when you 

Z O

.

• 

try again.

• Plug in the AC adaptor.

A busy tone sounds when you

• Another handset is in use.

Z O

.

You cannot dial.

• The unit is in call prohibition mode. Cancel the mode

(p.33).

“

Î

” flashes during a conversation

• The handset is out of range. Move closer to the 

and the call is disconnected.

• 

base unit and make the call again.

• Plug in the AC adaptor.

Static, sound cuts in/out, fades.

• Locate the handset and base unit away from other

Interference from other electrical 

• 

electrical appliances.

units.

• Move closer to the base unit.

The handset does not ring.

• Turn the power ON (p.12).
• The ringer is set to OFF. Select the desired volume

level (p.29).

The base unit does not ring.

• The ringer is set to OFF. Set to HIGH, MEDIUM or

LOW (p.41).

You cannot program function items

• Programming is not possible while the unit is in the

such as the handset ringer volume.

• 

talk or intercom mode.

• Do not pause for over 60 seconds while

programming.

You cannot store a phone number

• You cannot store a phone number while the unit is 

in memory.

• 

in the talk or intercom mode.

• Do not pause for over 60 seconds while storing.

4

7

• Key lock mode is set. Cancel the mode (p.26).

Summary of Contents for KX-TCD700BX





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands