8
Preparation
Battery replacement
If
0
7
4
flashes even when the handset
batteries have been fully charged, both
batteries must be replaced.
Important:
L
Please use only the Panasonic batteries,
noted on page 3.
L
Use only rechargeable batteries. If you
install non-rechargeable batteries and
start charging, the batteries may leak
electrolyte.
L
Do not mix old and new batteries.
L
Use only 2 nickel metal hydride (Ni-MH)
batteries or 2 nickel cadmium (Ni-Cd)
batteries. Do not mix battery types.
L
Ensure that the correct battery type is
selected (page 21).
1
Press the notch on the cover firmly and
slide it in the direction of the arrow.
2
Remove the batteries positive (
+
)
terminal first. Replace both batteries. See
the battery installation on page 6.
Turning the power on/off
Power on
Press
{ih}
for about 1 second.
L
The display will change to the standby
mode.
Power off
Press
{ih}
for about 2 seconds.
L
The display will go blank.
TCD440̲445NZ(E).book Page 8 Monday, March 29, 2004 9:02 AM
