Panasonic KX-TCD440NZ, Operating Instructions Manual

Page: 32 / 40

32
Multi-unit Operation
Setting all or selected
handsets to ring
You can select one of 3 methods to
determine how the handsets ring for
incoming calls.
− “
1
”: All handsets will ring.
− “
2
”: Selected handset(s) will ring.
− “
3
”: Selected handset(s) will ring, then all
handsets will ring.
Setting all handsets to ring
1
Press
{j}
.
2
Press
{v}
repeatedly to display
“
SETTING BS
”, then press
{>}
.
3
Press
{
1
}
.
4
Enter “
0000
” (default base unit PIN).
L
If you changed PIN, enter it (page 22).
5
Press
{
1
}
to select “
1
”.
6
Press
{>}
, then press
{ih}
.
Setting the selected handset(s) to ring
1
Press
{j}
.
2
Press
{v}
repeatedly to display
“
SETTING BS
”, then press
{>}
.
3
Press
{
1
}
.
4
Enter “
0000
” (default base unit PIN).
L
If you changed PIN, enter it (page 22).
5
Press
{
2
}
to select “
2
”.
L
All registered handset numbers will be
displayed and the pre-selected
handset number will flash.
6
Press the desired handset number(s).
L
The selected handset number(s) will
flash.
L
To cancel a selected handset number,
press the number again. The number
will stop flashing.
7
Press
{>}
, then press
{ih}
.
Setting the selected handset(s) to ring
before all handsets ring
1
Press
{j}
.
2
Press
{v}
repeatedly to display
“
SETTING BS
”, then press
{>}
.
3
Press
{
1
}
.
4
Enter “
0000
” (default base unit PIN).
L
If you changed PIN, enter it (page 22).
5
Press
{
3
}
to select “
3
”.
L
All registered handset numbers will be
displayed and the pre-selected
handset number will flash.
6
Press the desired handset number(s).
L
The selected handset number(s) will
flash.
L
To cancel a selected handset number,
press the number again. The number
will stop flashing.
7
Press
{>}
.
8
Press a dial key from
{
1
}
to
{
6
}
to select
the number of rings before all handsets
ring.
L
The selected number of rings will be
shown on the right edge of the display.
9
Press
{>}
, then press
{ih}
.
TCD440̲445NZ(E).book Page 32 Monday, March 29, 2004 9:02 AM