27
Preparation
“
To check the day/time
Repeat steps 1 to 6 on page 26.
≥
The current day/time is heard. When finished, press
(FUNCTION/EXIT/CH)
.
For Call Display service users
(p. 36)
≥
The Call Display information will re-set the clock after the first ring if the
adjusted time is incorrect. However, the day will not be re-set by the Call
Display information. Adjust the correct day by following the steps on
page 26.
≥
If the time has not previously been set, the Call Display information will not
adjust the clock.
≥
The Call Display information will automatically adjust the clock for daylight
saving time.
If a power failure occurs, “
” will flash or the incorrect day/time will
be shown on the main unit display. Reprogram the current day/time.
≥
In step 7, you cannot enter numbers greater than 12. Do not use military time.
(To set 13:00 hours, enter “0100” and select “PM” by pressing
($)
.)