77
Answering System
“
Setting the Remote Code
The remote code prevents unauthorized people from accessing your unit
and listening to your messages. Choose any 2-digit number (00–99).
The factory preset remote code is “11”. If you do not program your own
remote code, you can use “11”.
Make sure that the unit is in the standby mode.
1
Press
(FUNCTION/EXIT/CH)
.
2
Press
(›)
or
(‹)
repeatedly until the arrow
points to “
Program
”.
3
Press
FWD/EDIT
(fl)
(
Yes
key).
4
Press
(›)
or
(‹)
repeatedly until the arrow
points to “
TAD program
”.
5
Press
FWD/EDIT
(fl)
(
Yes
key).
≥
The base unit display shows the answering
system function menu.
6
Press
(1)
.
≥
The current remote code is displayed on the
base unit.
7
Enter a remote code using a 2-digit
number (00–99).
8
Press
FWD/EDIT
(fl)
(
Save
key).
≥
A beep sounds.
≥
To return to the standby mode, press
(FUNCTION/EXIT/CH)
.
≥
If 6 beeps sound during programming, a wrong key was pressed. Enter the
correct number.
To check the remote code
Repeat steps 1 to 6.
≥
The current remote code is displayed on the base unit. When finished, press
(FUNCTION/EXIT/CH)
.
Ringer volume
1
Program
43
1
=Yes
1
Save DIRECT#
Set flash time
43
1
=Yes
Talk switching
1
TAD program
43
1
=Yes
Answering
system setting.
See base unit.
Remote code
:11
Base unit display
