Panasonic KX-TC1871CB Page 20 Operating Instructions Manual Download

Page: 20 / 96

Programmable Functions

You can program the following function items using the handset near
the base unit. The display shows the programming instructions. See the
corresponding pages for function details.
Make sure the unit is in the standby mode.

During programming
*To select a desired function item, press

(›)

(‹)

repeatedly until the

arrow points to the item. Then press

FWD/EDIT

(fl)

to go to the next step.

≥

If the handset displays “

No link to base. Place on cradle and try

again.

” and an alarm tone sounds, move closer to the base unit and try again.

≥

You can exit the programming mode any time by pressing

(FUNCTION/EXIT/CH)

≥

If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.

Press

(FUNCTION/EXIT/CH)

<Function menu>*

To store an item in the directory (p. 48).

To dial the stored pager number (p. 73).

To select the ringer volume (p. 22).

Press

FWD/EDIT

(fl)

To store a phone number in the DIRECT button
(p. 45).

To select the flash time (p. 63).

To select the line mode (p. 19).

To select the dial mode (p. 18).

To set the auto talk feature (p. 21).

To program answering system functions (p. 25).

To set the “C.WTG (Call Waiting) options”
mode (p. 60).

To select the display language (p. 17).

Save directory

Calling pager

Ringer volume

Program

<Function menu>*

Save DIRECT#

Set flash time

Set line mode

Set dial mode

Talk switching

TAD program

C.WTG options

Change language

Summary of Contents for KX-TC1871CB

































































































Search results

Summary of Contents for KX-TC1871CB

Reviews:

Related manuals for KX-TC1871CB

Brands by name

Popular brands

Panasonic KX-TC1871CB, Operating Instructions Manual

Search results

Summary of Contents for KX-TC1871CB

Reviews:

Related manuals for KX-TC1871CB

Brands by name

Popular brands