4.1 Introduction
234
Feature Guide
4.1
Introduction
4.1.1
Software Modes
When the Maintenance Console is started, it enters Initial mode. From here, you can choose to enter either
Batch mode or Interactive mode to program the PBX.
•
Batch mode
Batch mode allows you to create new system data files, and make modifications to system data
files stored on your PC, without being connected to the PBX. When you connect to the PBX, the
modified data will be uploaded at one time. To enter Batch mode, select an option from the
File
menu.
•
Interactive mode
Interactive mode allows you to directly modify the system data and settings stored in the PBX's
memory from a PC that is connected to the PBX. This mode displays the system data that is
currently being used by the PBX, rather than the system data stored on the SD memory card. Data
can be modified and results displayed in real time. To enter Interactive mode, select an option from
the
Connect
menu.
Note
In Initial mode, the only other option that can be accessed is
4.4.5 Tool—System data Convert
.
4.1.2
Status Bar
The status bar is the bar at the bottom of the Maintenance Console window, which displays information on
the current state of the Maintenance Console.
Whether the status bar is displayed or not can be chosen by selecting
Status Bar
from the
View
menu.
The information displayed is as follows, in order from left to right:
4.1.3
Access Levels
There are 3 main levels of access to the Maintenance Console: User, Administrator and Installer. Each level
has its own Programmer Code, which must be entered to run the Maintenance Console.
Area
Values
Description
Program Mode
Initial Mode
Batch Mode xxx
Interactive Mode
See "4.1.1 Software Modes" above.
"xxx" is replaced by the name of the
current system data file.
PBX Type
Type: TAW848
Displays the type of PBX being
programmed.
PBX System Data
Version
Versionxxx-xxx
Displays the version number of the
system software installed to the PBX.
The first 3 digits are the version number,
and the last 3 digits are the revision
number.
Summary of Contents for KX- TAW848
