1.20 Portable Station (PS) Features
152
Feature Guide
following extension settings of the wired telephone are copied to the extension settings of the PS when
Wireless XDP Parallel mode is activated, and will remain in effect for the PS after the mode is canceled.
–
Call Waiting Setting (
→
–
FWD/Do Not Disturb (DND) Setting (
→
1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND))
–
Call Pickup Deny Setting (
→
–
Executive Busy Override Deny Setting
–
Itemized Billing Code for Automatic Route Selection (ARS) (
→
1.9.1 Automatic Route Selection
–
Extension Personal Identification Number (PIN) (
→
Extension Personal Identification Number
→
1.23.1 Extension Personal Identification Number (PIN))
–
COS Programming (
→
→
–
Extension Group (
→
→
–
Transfer Recall Destination for Call Transfer and Call Park
•
The PS will retain its original settings for the following items even when in Wireless XDP Parallel mode.
These settings can be set on the wired telephone and PS independently, and the settings can be
different.
–
Ring Tone Pattern Table Selection (
→
1.1.3.2 Ring Tone Pattern Selection)
–
Preferred Line Assignment—Incoming (
→
1.4.1.2 Line Preference—Incoming)
–
Preferred Line Assignment—Outgoing (
→
1.5.5.2 Line Preference—Outgoing)
–
Hot Line Setting (
→
–
Display Language (
→
–
Flexible Button Assignment (
→
–
Transfer Recall Destination for Call Transfer and Call Park (The setting assigned to the wired
telephone will first be copied to the PS's extension settings, then can be changed for the PS if
necessary.)
If an extension number is required when changing any PS settings while in Wireless XDP Parallel
mode, use the original extension number assigned to the PS, not the extension number of the paired
(wired) telephone.
•
If the Extension Feature Clear is performed, the corresponding extension data for both the wired
telephone and the PS will be cleared. (
→
1.23.2 Extension Feature Clear)
•
When a call arrives, both the wired telephone and the PS will ring. However, when one of the following
settings is made, only the telephone which was used to make the setting will ring.
–
Automatic Callback Busy
–
Transfer Recall
–
Hold Recall (
→
–
Call Park Recall
Feature Guide References
1.7.1 Automatic Callback Busy (Camp-on)
User Manual References
Summary of Contents for KX- TAW848
