1.4 Answering Features
48
Feature Guide
Conditions
[Prime Line]
•
The priority of the incoming call is as follows:
1)
The call arriving at a button on which the "Prime Line" is assigned.
2)
The call arriving at the INTERCOM button.
User Manual References
3.1.2 Settings on the Programming Mode
1.4.1.3
Call Pickup
Description
An extension user can answer a call ringing at any other extension.
The following types of Call Pickup are available:
Call Pickup Deny
An extension user can prevent other extensions from picking up calls ringing at his or her own extension.
Conditions
•
Call Pickup applies to:
Intercom, CO line, and doorphone calls
•
Internal Call Block
An extension which cannot call certain extensions based on Class of Service (COS) programming (
→
1.1.2.2 Internal Call Block) also cannot pick up calls ringing at those extensions.
[Directed Call Pickup]
•
A user can also pick up a call to a specified extension by pressing the corresponding DSS button. This
feature is only available when (1) the user's extension is allowed to use this feature through COS
programming, (2) DSS buttons for extensions or incoming call distribution (ICD) groups have this
feature enabled through system programming, and (3) the light pattern of DSS buttons for incoming
calls to extensions or ICD groups is set to "
On or Flash
" through system programming.
[Group Call Pickup]
•
A specified number of call pickup groups can be created (
→
Extension Groups of a Pickup Group [650]),
each of which consists of extension groups. One extension group can belong to several call pickup
groups. (
→
Type
Description
Directed
A specified extension's call is answered.
Group
A call within a specified call pickup group is answered.
Summary of Contents for KX- TAW848
