4.9
Resource Programming
System Data Printout
802
4-132
System Programming
Description
Starts or stops printing the system data. All or a specific range of
the current system-programmed data is printed out. The ranges are
as follows:
Manager
: Manager Programming [000] through [009]
System
: System Programming [100] through [148]
Timers
: Timer Programming [200] through [219]
TRS/ARS
: TRS/ARS Programming [300] through [334]
Outside line : CO Line Programming [400] through [417]
COS
: COS Programming [500] through [509]
Extension
: Extension Programming [600] through [610]
Resource
: Resource Programming [800] through [815]
Option
: Option Programming [990] through [991]
Selection
• Printout range number:
(All) / 0 (Manager) / 1 (System) / 2 (Timer) /
3 (TRS/ARS) / 4 (Outside line) / 5 (COS) /
6 (Extension) / 8 (Resource) / 9 (Option)
• Start / Stop
Default
Not applicable.
Programming
1.
Enter 802.
Display: 802 SYSTEM DATA
2.
Press NEXT.
Display: Enter Range?
→
3.
Enter a printout range number or
for “All”.
Display: Print-Out:Start
4.
Press STORE to start printing.
Printing starts.
To stop printing, press SELECT and go to step 5.
When printing is completed, the display shows:
Display: Print-Out:Finish
5.
Press STORE.
Display: Print-Out:Stop
6.
Press END.
