4-18
System Programming
4.2
Manager Programming
System Speed Dialing Number Set
001
Description
Used to program the System Speed Dial numbers. These numbers
are available to all extension users. There are 100 numbers from 00
to 99.
Selection
• Speed dial number: 00 through 99
• Telephone number: 24 digits (max.)
Default
All speed dial numbers – Not stored
Programming
1.
Enter 001.
Display: 001 SYS SPD DIAL
2.
Press NEXT.
Display: SPD Code?
→
3.
Enter a speed dial number.
To enter speed dial number 00, you can also press NEXT.
Display example: 00:Not Stored
4.
Enter a telephone number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To program another speed dial number, press NEXT or
PREV, or SELECT and the desired speed dial number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• Each speed dial number has a maximum of 24 digits. The valid
characters are 0 through 9, the
and # keys, and the FLASH or
FLASH/RCL, PAUSE, SECRET and – (hyphen) buttons.
– To store a flash signal, press FLASH or FLASH/RCL.
Note: The stored flash will only be effective during a call.
(Refer to Section 3, “External Feature Access”.)
– To store a hyphen, press the “–” button.
– To store a pause, press PAUSE.
(Refer to Section 3, “Pause Insertion, Automatic”.)
