
P
3
Features
3-120
Features
P
hantom Extension
Description
Allows the system to route calls to a phantom extension. A call to
a phantom extension is sent to extensions that have the
corresponding Phantom Extension button. A Phantom Extension
button can be assigned by Station Programming.
Conditions
• Types of calls whose destination can be the phantom extension are:
Outside calls – Direct In Lines (DIL) 1:1;
Direct Inward System Access (DISA);
Intercept Routing – No Answer (IRNA)
Intercom calls – Extension; Transfer
• You can call the phantom extension by pressing the Phantom Extension
button or by dialing the phantom extension number. If several extensions
have the same phantom extension number, they will ring simultaneously.
• A phantom number must be assigned by System Programming before
assigning the Phantom Extension button by Station Programming.
• There is a maximum of 16 phantom numbers. Each number has two to
four digits, consisting of numbers 0 through 9.
• The phantom number cannot be used for feature settings such as Call
Forwarding.
• The lighting patterns and statuses of the Phantom Extension button are
shown below.
• A DSS (Direct Station Selection) button can be assigned as the
Phantom Extension button so that the operator can use the button for
transferring a call.
Programming References
Section 4, System Programming
[124] Phantom Extension Number Assignment
Station Programming.......................................................User Manual
Flexible Button Assignment – Phantom Extension Button
Feature References
None
Operation References
DPT Features
—User Manual
Phantom Extension
Phantom Extension Status
Idle
Calling a phantom extension
Incoming call
Lighting pattern
Off
Red on
Flashing green rapidly