Panasonic KX-T336200, Installation Instructions Manual

Page: 258 / 872

D. Error Message Tables
1.00 Error Messages Related to
the Assigning Items in the
Same Command
If there is a wrong entry in the displayed screen,
The (XXX) indicates one of the error message
the following appears on the message line when
numbers shown below and possible causes of the
storing the entry: “DATA ERROR (XXX).” errors and countermeasures for them are as
DATA
ERROR No.
101
102
110
130
140
.
141
'150
160
190
follows.
Probable Cause Countermeasure
(page length)-(skip length) 6 Make (page length)-(skip length) 6.
(receive digit) (delete digit) is not established Make (receive digit) (delete digit).
in Special Attended DID screen.
Restriction Level-Operator Restriction Make Restriction Level-Operation 6
International is not established in Operation Restriction Level-International
screen
Day-night combination the incoming mode is Change the day-night combination in
not correct.
incoming mode.
Combination of the terminals of operators Change the combination of terminals for
is incorrect. operators 1.2.
DN is not installed. Designate the installed DN.
Attempting to assign of UCD 1 to 4
Set FDN of other UCD. or extension director]
for the overflow destination of UCD 5 to 32 number.
Attempting to assign its own extension number Specify the number except its own extension
on the key which cannot be assigned to its own number.
extension number.
SDN
Specifying UCD number incorrectly. Assign UCD to only one ICM.
Date value is incorrect on the check of month, Check the date setting.
and leap year in the time and date setting
lo-D-1