Panasonic KX-T336200, Installation Instructions Manual

Page: 30 / 872

9.00 PLC Card
Functions
PLC card
(1) PITS and DSS console interface. (8 circuits/
card)
Maximum loop resistance : 40 ohms
Power supply 1 : (supplied through
speech path, and with
current limitation circuit).
Power supply 2 : (supplied through
data line).
(2) PITS
interface with OHCA feature.
When a PITS
with
OHCA feature is connected
to a port, an OHCA piggy back card
T96136) should be mounted to its interface
circuit
Operation
LED indicator on the PLC card lights when the
system reset or PLC local reset occurs.
10.00 SLC Cards
10.01 SLC Card
Functions
SLC card
(1) Standard SLT interface.
Maximum loop resistance : 600 ohms.
(including SLT)
Power supply : (with current limitation
circuit.)
2 DTMF receivers, dial pulse detector.
(2) Power Failure Transfer by ports 1
through 8.
When power failure occurs, SLT Tip Ring are
led by a relay, but SLT PFT modular and
LCOT GCOT modular should be connected
each other by connection cords in advance.
(3) Diagnostic transfer (DT) by each port.
Diagnostic relay is placed in Tip
Ring
of each
port.
During diagnostic test, only one diagnostic
relay in the SLT of a system is activated.
Operation
LED indicator on the SLC card lights when
system reset or SLC local reset occurs.
10.02 SLC-M Card
Functions
SLC-M Card (KX-T96175)
1
Same as 10.01 SLC Card
(3)
(4) SLT with Message Waiting Lamp interface
Power supply to Message Waiting
Lamp: (when 1
Operation
Same as 10.01 SLC Card
1 -E-6