Panasonic KX-T336200, Installation Instructions Manual

Page: 196 / 872

When selecting “1. CO Line” in Trunk submenu screen, the setting
the smallest Trunk Equipment No. appears on the screen first.
If the “Group-Trunk Group” containing the CO line has assigned
following items cannot be entered : is displayed :
l
Direct Termination
l
Night Answer Point (Type : No)
l
Dial Mode
l
DTMF Duration Time
l
Pulse Speed
l
% Break
l
CPC Detection
If “the Group-Trunk Group” containing the CO line has assigned
other than “DID” or “TIE”, the following items cannot be entered : is
l
Start Arrangement
l
Wink Signal Time-Out
Direct Termination
This is assignable only when the “Group
line has ‘Incoming Mode (Day)”
displayed and setting is impossible.
Night Answer
Point (Type : No)
This is assignable only when the “Group
line has ‘Incoming Mode (Night)” assignt
Otherwise, -- is displayed and setting
. When pressing the NEXT key, this screen appears in ascending order of
Equipment number. After the largest number appears, the smallest one
Pressing the PREV key changes the screen in reverse order.
Function
The following functions appear on the function line of this setting screen.
COMMON (SHOW LV, CHG LV, INS, OUS, REMOVE, EXIT) and HRD
are available in all setting screens. INDEX and READ keys are also ava
screen. The operation of function keys are described in Section 7-l
Function Only messages are provided here.
Equipment No. (Physical
9-F-4
(70695)