Panasonic KX-T336200, Installation Instructions Manual

Page: 87 / 872

1.02 Screened Call Transfer to Station
Description
Allows an extension user to transfer the calls
(both extension and outside calls) to another
extension with announcement.
Programming
System Programming
Reference
Dumb
“World Select
SLT Transfer Operation
Operation 2 (Mode 2)
Conditions
While having a conversation:
The extension user cannot transfer the following
calls.
1.
l
A call with Attendant Console
l
A call with Doorphone
Press the switchhook for
approximately one half second
and release it.
l
The other party is placed on
Consultation Hold.
l
You hear confirmation tone 2
and then dial tone 1 or 3 or
If Music on Hold is assigned, Music on Hold is
sent to the transferred party since the party starts
being transferred until he starts conversation with
the destination party.
For further detail, refer to Section 3-E-l
“Music on Hold.”
The user can execute this function even after
holding another party.
Operation 1 (Mode 1)
While having a conversation;
Press the switchhook for
approximately one half second
and release it.
l
The other party is placed on
Consultation Hold.
l
You hear confirmation tone 2
and then dial tone 1 or 3 or 4.
Dial the directory number of the
destination: three or four digits.
l
You hear tone.
Wait for the answer and
announce.
4. Replace the handset.
l
The call is transferred to the
destination.
Note:
If you want to return to the held party, press the
switchhook for approximately one half second
and release before the destination extension
answers.
2 .
3 .
5 .
Note:
Dial the feature number for
Transfer ‘58” (Default).
l
You hear confirmation tone 2
and then dial tone.
Dial the directory number of the
destination: there or four digits.
l
You hear tone.
Wait for the answer and
announce.
Replace the handset.
l
The call is transferred to
the destination.
*If you want to return to the held party, press the
switchhook for approximately one half second
and release it before the destination extention
answers.
the feature number for “Transfer” is not dialed
at step 2, the call will be disconnected after
replacing the handset.
5-D-2
(70695)