Panasonic KX-T336200, Installation Instructions Manual

Page: 128 / 872

Description of Assigning items
1st through 12th Hundred Block Assigns the leading one or two digits for extension DN (Dire&y
Extension Number). If the leading digit is not programmed, the DN assignment
is not possible.
Conditions
“System-Numbering Plan” setting cannot be changed if ‘System-Operation”,
Numbering Plan is set to “Fixed 1” or “Fixed 2.” If “Flex” is selected, this setting is
changeable.
When entedng “DG 1 to “DG 2,” the cursor does not advance nor return automati-
cally. Use
the and
keys to move the cursor.
“Parameter Save OK?” will be displayed on this screen, if you attempt to exit this
screen without saving the data change you’ve made.
Different from other screens, “Parameter Save OK?” is not displayed on this screen
when you press the key.
Data storage is executed by the PF 4 (Memory) key or the PF 2 (End) key for all
screens at the same time. Logical check is also performed according to the follow-
ing logic:
Extension numbers and other PBX extension numbers are three or four.
digits and the leading one or two digits are assigned in “Numbering Plan”
s c r e e n s .
Feature numbers may be one, two, three or four digits.
Those numbers assigned in Numbering Plan screens cannot include the
same number assigned to other feature number as the part or whole of it.
For example, if the digit is assigned to the feature number for
Group Access” and another digits is assigned for “Trunk Group
6 Access,” it is checked at the time of data storage. and
351” cannot be present at the same time.
It is possible to store through as the feature numbers.
However, if or is included in the feature numbers, those features are not
accessed by the rotary telephone extensions.
1 st to 12th Hundred
Block Extension
Extension numbers cannot include and
SD-84
(70695)