Panasonic KX-T336200, Installation Instructions Manual

Page: 234 / 872

50.00 Automatic Busy-out Count (ABC)
Description
It is administrable to busy out the invalid CO line automatically to prevent
extension users from accessing it by monitoring the loop current sent through
CO line.
(Password level: Three or higher).
One of the following three options is assignable on a CO line basis.
(1) N=O
On CO calls, the system monitors a loop current sent through the CO line,
and if a loop current is not detected, busy tone is sent to the caller.
(2j
to 240
On CO calls, the system monitors a loop current sent through the CO line,
and if a loop current is not detected pre-assigned times (1 to 240)
consecutively, busy tone is sent to the caller.
Then the system busies out the corresponding CO line automatically.
(3)
On CO calls, the system does not monitor the loop current sent through the
CO line, CO line is always seized by extension users whether
loop current is running or not.
Refer
to
Section 52.00 L-COT/G-COT Busy Out Looprelay.
Input Format
.
Index Number
Index Number Explanation
I
I
1011 to3166
Physical Number of the Trunk Port
I
Input Value for Item Number
Assigning Items Input Value
None Automatic Busy-out Count
(Loop Current Detection) (Automatic Busy-out)
0: Yes
No
1 Yes
Yes
if loop current is not
detected by the pre-
assigned times (1 to 240)
241 :
No
No
(Default 241)
10-C-76