Settings and Printing
Maintenance
Specifications
49
Error Message
Possible Cause
Oil Roll wearing out
Oil supply roll is wearing out.
Replace the oil supply roll
soon.
Corrective Action
Close the left side door.
Standard cassette side door is
open.
Upper Left side door
Open
Install a transparency tray.
Transparency tray is not
installed.
Transparency Tray
Not installed
Install the transparency tray
with transparencies in it.
Transparency tray is empty.
Transparency Tray
Empty
Error Messages
Transfer wearing out
Transfer unit is wearing out.
Replace the transfer unit and
reset the counter
(see "Using the
Printer Panel (Menu Mode)" in
Settings and Printing)
.
Install the paper feeder.
Paper feeder
Not installed
Paper feeder is not installed.
Wait until the printer cools
down, or use in a cooler place
[below 35°C (95°F)].
The printer is too hot or room
temperature is too high to print
Labels.
Too hot to print Label
Remove Label, Cancel job
Paper Tray
Empty
No media tray is installed or
media tray is empty.
Install a media tray with paper
in it.
Paper Tray
Not installed
Paper tray is not installed.
Install the paper tray.
Replace the 2nd cassette
feeder with the one
compatible with this model.
An incompatible 2nd cassette
feeder is installed.
Option feeder
Incompatible
Remove the printed media
from the output tray.
Output tray is full.
Output Tray
Full
Overrun
Check on the Page Protection
check box in the Setup tab.
Overrun error
Install the oil supply roll.
Oil supply roll is not installed.
Oil Roll
Not installed
Replace the oil supply roll
now.
Oil supply roll is worn out.
Oil Roll
Worn out