Panasonic KX-P 8410 Series Operating Instructions Manual Download Page 66

Page: 66 / 175

The KX-P8410 window can be displayed from Windows (

☞

below) or from an

application

(

☞

P. 68)

Note:

Available option tabs and operation buttons displayed through Windows 95 are
different from those displayed through Windows 3.1.

Choosing Printer Properties Under Windows:

■

For Windows 95

Click Start , select Settings, then click Printers.

The Printers window is displayed.

Click the

Panasonic KX-P8410

icon.

Click the File menu, then click Properties.

The Panasonic KX-P8410 Properties window is displayed.

Using the Printer

Displaying the Panasonic KX-P8410 Window

(for Windows 95 / 3.1)

Summary of Contents for KX-P 8410 Series
















































































































































































Search results

Summary of Contents for KX-P 8410 Series

Reviews:

Related manuals for KX-P 8410 Series

Brands by name

Popular brands

Panasonic KX-P 8410 Series, Operating Instructions Manual

Search results

Summary of Contents for KX-P 8410 Series

Reviews:

Related manuals for KX-P 8410 Series

Brands by name

Popular brands