56
The printer panel provides an interface to adjust the density of the toner applied to
the media. This feature compensates for the changes in density that can occur as
environmental conditions changes, toner cartridges or the imaging unit age.
Perform the following steps to adjust the color density:
To print a Color Calibration Page:
#
Press the MENU/EXIT button on the printer panel.
$
Press the
F
button.
%
Press the ENTER button.
&
Press the
F
button 5 times and the following is displayed.
'
Press the ENTER button.
A Color Calibration Page will be printed.
1
Setup
Setting the Color Density
Menu Mode
Test Page
Menu Mode
Color Calibration
Color Calibration
Calibration Offset
Color Calibration
Calibration Test Print
MENU
/EXIT
CONTINUE
CANCEL
ENTER
READY
ERORR
F
I
MENU/EXIT
ENTER
