Panasonic KX-P 8410 Series Operating Instructions Manual Download Page 143

Page: 143 / 175

143

Correctly install the
SCSI board and its
driver. (Refer to the
manual of the SCSI
board.)

wnaspi32.dll will be
installed or replaced
with a new version.

For any other trouble
related to SCSI, refer to
the SCSI section of
Care and Maintenance

(

☞

P. 134)

The ASPI manager
installed on this PC does
not support Windows.
Install ASPI for Windows.
[e.g. install wnaspi32.dll to
your windows (system
directory)].

The ASPI for Windows
installed on this PC does
not support expected
mode. Install newer version
of ASPI for Windows.

Error message

Possible cause

Recovery

ASPI Manager is not found.
Install ASPI for Windows.
(e.g. install wnaspi32.dll to
your windows (system
directory.)

Care and Maintenance

Can not find Panasonic KX-
P8410. Make sure that
Panasonic KX-P8410 is
connected to your PC by
SCSI, and then retry again.

Correctly install SCSI
board and its driver.
(Refer to the manual of
the SCSI board.)

wnaspi32.dll will be
installed or replaced
with a new version.

SCSI board and its
driver are not installed
correctly.

Cable connection is
improper or printer is
not ready.

The terminator
setting is improper.

The ASPI for Windows
installed on this PC does
not have expected function.
Install newer version of
ASPI for Windows.

SCSI board and its
driver are not installed
correctly.

Perform the following
procedure.
1. Confirm that the

terminator is correctly
set.

2. Confirm that the

printer is ready.

3. Confirm that the

printer is correctly
connected with a
SCSI cable.

4. Turn off the

computer, then turn it
on again.

Can not initialize ASPI for
Windows. Install newer
version of ASPI for
Windows

Printer Driver For Windows 95

Summary of Contents for KX-P 8410 Series
















































































































































































Search results

Summary of Contents for KX-P 8410 Series

Reviews:

Related manuals for KX-P 8410 Series

Brands by name

Popular brands

Panasonic KX-P 8410 Series, Operating Instructions Manual

Search results

Summary of Contents for KX-P 8410 Series

Reviews:

Related manuals for KX-P 8410 Series

Brands by name

Popular brands