![background image](http://html.mh-extra.com/html/panasonic/kx-nt400/kx-nt400_operating-instructions-manual_270024155.webp)
Entering Characters
The dial keys are used to enter characters and numbers. Each of the dial keys has multiple characters assigned
to it. To enter a character, press the appropriate dial key until the character you want appears. To enter another
character that is assigned to the same key, first press (
RIGHT
) to move the cursor to the right.
Character Tables
You can enter alphabetic characters and digits using the dial keys. Pressing a dial key repeatedly displays different
characters, as shown in the following tables.
While entering characters, you can move the cursor with (
LEFT
) and (
RIGHT
) on the Navigator key. On the
Feature Key
screen, the
Calls
screen (in Line Buttons mode), and the
Programming
screen, you can delete a
character by pressing
(
TRANSFER
). On the other screens, you can delete a character by pressing (
LEFT
)
on the Navigator key. For a list of available characters, refer to the following pages. The tables show you the
characters available for each button.
Note
•
You can switch the character table by pressing
.
•
You can specify the length of time before a character is automatically accepted. After you enter a character,
if you do not press any other buttons before the specified length of time elapses, then the character is
automatically accepted. Once a character has been accepted, pressing the same button will not change
the character, but will instead add a new character.
The default length of time for automatic acceptance is 500 ms (0.5 seconds).
For details about the setting, see "Display / Operation Settings (Page 121)".
Table 1 (Standard mode)
!
A
D
G
J
M
P
T
W
(space)
$
?
1
"
B
C
a
b
c
2
E
F
d
e
f
3
H
I
g
h
i
4
K
L
j
k
l
5
N
O
m
n
6
o
Q
R
S
p
q
r
s
7
U
V
t
8
u
v
X
Y
Z
w
x
y
z
9
.
,
:
;
0
%
&
(
)
#
/
+
—
=
<
>
£
’
Times
Buttons
@
Note
•
A space counts as one character.
Operating Instructions
155
Settings and Customisation