Panasonic KX-NS300 Installation Manual Download Page 95

Page: 95 / 300

Connect the earth rod to the surge protector using an earthing wire with a cross-sectional area of at least
1.3 mm

Bury the earth rod near the protector. The earthing wire should be as short as possible.

The earthing wire should run straight to the earth rod. Do not run the wire around other objects.

Bury the earth rod at least 50 cm underground.

Note

•

The above figures are recommendations only.

•

The length of earth rod and the required depth depend on the composition of the soil.

Installation Manual

4.2.11 Surge Protector Installation

Summary of Contents for KX-NS300













































































































































































































































































































Search results

Summary of Contents for KX-NS300

Reviews:

Related manuals for KX-NS300

Brands by name

Popular brands

Panasonic KX-NS300, Installation Manual

Search results

Summary of Contents for KX-NS300

Reviews:

Related manuals for KX-NS300

Brands by name

Popular brands