Panasonic KX-NS300, Installation Manual

Page: 174 / 300

3. a.
Click Setup
®
PBX Configuration
®
Configuration
®
Slot .
b.
Click System Property .
c.
Click the V-IPGW tab.
d.
Click DN2IP .
e.
When using the PBX code method:
In the Leading Number cell, type the remote PBX
code and starting digit of destination extension.
When using the extension number method:
In the Leading Number cell, type the remote PBX
code and starting digit of destination extension.
f.
In the Remaining Number of Digits cell, type a
number of digits to dial following the leading number.
g.
In GW No./GW Group Selection , select GW No.
h.
In the GW No. cell, select 1 (the gateway entry for
the destination gateway device at the remote PBX).
i.
Click OK .
Note
For more details about gateway settings, refer to "9.2.1 PBX Configuration—[1-1]
Configuration—Slot—System Property—Main—V-IPGW–GW Settings–Main" in the PC Programming
Manual.
174 Installation Manual
5.5.2 Programming the Address Translation Table