Panasonic KX-NS1000, Programming Manual

Page: 216 / 1182

FAX Sending Method
Specifies the method of transporting the fax signal.
Value Range
G.711 Inband, T.38
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
Maximum Bit Rate
Specifies the maximum bit rate of the fax signal.
Value Range
No Speed Limit, 2400 bps, 4800 bps, 7200 bps, 9600 bps, 12000 bps, 14400 bps
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
FAX Detection Ability
Enables the use of the FAX Detection Ability feature. Since fax signals using a codec other than G.711 cannot
be received accurately at the destination, this feature automatically switches the codec to G.711 to enable
end-to-end fax signal relay over the network.
Value Range
Disable, Enable
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
PC Programming Manual References
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property—GW Settings–Option 1— IP Codec
Priority—1st, 2nd, 3rd
DTMF
Specifies the method to transport DTMF tones.
Value Range
Inband, Outband (RFC2833), Outband (H.245)
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
216 PC Programming Manual
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property