Panasonic KX-NS1000, Programming Manual

Page: 55 / 1182

Q When modifying the Numbering Plan, how do I set a 1-digit extension number?
A •
Perform the following steps:
1.
Clear the Leading Number cell.
2.
Click Apply .
3.
Set No. of Additional Digits to "None".
4.
Click Apply .
5.
Enter the desired value in the Leading Number cell.
6.
Click Apply .
7.
Set all extension ports to OUS status.
8.
On the relevant screens, set the extension numbers of extensions to the desired
values.
9.
Set all extension ports back to INS status.
Q How do I change a feature number?
A •
Perform the following steps:
1.
Open the 10.6.1 PBX Configuration—[2-6-1] System—Numbering
Plan—Main screen and navigate to the Features tab.
2.
Change the value in the Dial cell of the desired feature.
3.
Click Apply .
Q I cannot change a feature number.
A
•
It is not possible to use the same number for 2 items.
The number you are trying to store cannot be used if it is already being used by:
•
A feature number
•
An extension
•
A Dial setting (see 17.1 PBX Configuration—[9-1] Private Network—TIE
Table )
•
Quick Dialling (see 10.6.2 PBX Configuration—[2-6-2] System—Numbering
Plan—Quick Dial )
In any of these cases, choose another number.
Q How do I change the code used to access another PBX?
A •
Perform the following steps:
1.
Open the 10.6.1 PBX Configuration—[2-6-1] System—Numbering
Plan—Main screen.
2.
Select the Other PBX Extension tab.
3.
Change the value in the Dial cell of the desired feature.
4.
Click Apply .
Q I cannot change an Other PBX Extension code.
PC Programming Manual 55
2.3 Frequently Asked Questions (FAQ)