Panasonic KX-NS1000, Programming Manual

Page: 81 / 1182

5.2 System Control—MOH
5.2.1 System Control—MOH—Install
Sound files on the programmer’s PC can be installed to each PBX for use as Music on Hold (MOH).
This screen can be accessed only in On-line mode.
1.
Click Browse and select a WAV file to install as an MOH file. Only one file may be installed at a time.
2.
In the Select column, specify which PBX sites will install the sound file as an MOH file.
3.
As uploading the file to the PBX may require some time, a time can be set in Time Set .
4.
In BGM No. , specify which BGM number the MOH file will occupy.
5.
Click Execute to confirm the settings. If "Now" is set for Time Set , the installation will begin at this time.
Note
•
Users logged in to the Master unit can see the status of all One-look network sites. Users logged in to
a Slave unit may only view the status of that PBX.
•
Only WAV files can be installed, and file names must not exceed 57 characters in length (including the
file extension ".wav"). If non-alphabetic characters are used, the file name must not exceed 14
characters in length.
•
Some language codes for file names are not supported, and file names may not display correctly after
they are installed on the PBX. To ensure proper display, use only the ASCII character set for file names.
•
Files may not be larger than 80 MB in size.
•
User (User) level accounts cannot perform this procedure.
PC Programming Manual 81
5.2.1 System Control—MOH—Install