Panasonic KX-MC6020HX KX-FAP317E Operating Instructions Manual Download

Page: 20 / 124

2. Preparation

2 Preparation

Connections and Setup

2.1 Connections

Caution:

When you operate this product, the power outlet
should be near the product and easily
accessible.

Be sure to use the telephone line cord supplied
with this unit.

Do not extend the telephone line cord.

Note:

If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.

If you use the unit with a computer and your internet
provider instructs you to install a filter (

), please

connect it as follows.

Power cord

Connect to a power outlet
(220–240 V, 50/60 Hz).

Telephone line cord

Connect to a single telephone line jack (RJ11).

[

EXT

]

jack

You can connect an answering machine or an
extension telephone. Remove the stopper if
attached.

Answering machine (not supplied)

To the internet

Network router/Network hub (not supplied)

Also connect networked computers.

LAN cable (not supplied)

To assure continued emission limit compliance,
use only shielded LAN cable (category 5 straight
cable).

Automatic duplex unit (optional) connector

IMPORTANT NOTICE FOR THE USB
CONNECTION

DO NOT CONNECT THE USB CABLE UNTIL
PROMPTED BY THE MULTI-FUNCTION
STATION (page 27).

Designed to be used in Czech, Hungary, Slovakia
and other Eastern Europe according to the
location setting feature.

The default setting is Czech. To change the location
setting, see page 62 (feature #114).

MC6020HX-PNQX1501ZA-OI-en.book Page 20 Tuesday, April 22, 2008 3:40 PM

Summary of Contents for KX-MC6020HX KX-FAP317E





























































































































Search results

Summary of Contents for KX-MC6020HX KX-FAP317E

Reviews:

Related manuals for KX-MC6020HX KX-FAP317E

Brands by name

Popular brands

Panasonic KX-MC6020HX KX-FAP317E, Operating Instructions Manual

Search results

Summary of Contents for KX-MC6020HX KX-FAP317E

Reviews:

Related manuals for KX-MC6020HX KX-FAP317E

Brands by name

Popular brands