Panasonic KX-MC6020HX KX-FAP317E Operating Instructions Manual Download

Page: 14 / 124

1. Introduction and Installation

Firmly grip the monochrome drum cartridge (

) and

remove the protective tray (

) by sliding the drum

cartridge away from you.

Do not touch or scratch the green drum surface
(

) at the bottom of the drum cartridge.

Insert the monochrome drum cartridge (

) into right

side of the unit.

Make sure that the arrows (

) match to insert

the drum cartridge correctly.

Do not touch or scratch the accumulator unit
(

Before opening the protection bag of the new toner
cartridges, shake them vertically more than 10
times.

Remove the 4 toner cartridges from the protection
bags.

Remove the shipping tape.

Remove each protective tray (

) by lifting up the

toner cartridge (

Insert each toner cartridge (

) in the appropriate

color slot.
From left to right, yellow, magenta, cyan, black.

Make sure that the arrows (

) match to insert

the toner cartridge correctly.

Do not touch the toner cartridge shutter at the
bottom of the toner cartridge. The toner may spill
out of the toner cartridge.

MC6020HX-PNQX1501ZA-OI-en.book Page 14 Tuesday, April 22, 2008 3:40 PM

Summary of Contents for KX-MC6020HX KX-FAP317E





























































































































Search results

Summary of Contents for KX-MC6020HX KX-FAP317E

Reviews:

Related manuals for KX-MC6020HX KX-FAP317E

Brands by name

Popular brands

Panasonic KX-MC6020HX KX-FAP317E, Operating Instructions Manual

Search results

Summary of Contents for KX-MC6020HX KX-FAP317E

Reviews:

Related manuals for KX-MC6020HX KX-FAP317E

Brands by name

Popular brands