Panasonic KX-MB1500E, Operating Instructions Manual

Page: 20 / 92

2.4 Date and time (KX-MB1520/
KX-MB1530 only)
We recommend you to set the date and time. The other
party will receive your unit’s date and time as the header
information.
M Set N MFNMEN
M Menu N
M Fax N
1
M Menu N A MBNM 1 NM 0 NM 1 N A M Set N
2
Enter the current date/month/year by selecting 2
digits for each.
Example: 3 August, 2011
M 0 NM 3 N M 0 NM 8 N M 1 NM 1 N
3
Enter the current hour/minute by selecting 2 digits for
each.
Example: 10:15 PM (12 hour clock format)
1.
M 1 NM 0 N M 1 NM 5 N
2. Press MGN repeatedly to select “
PM
” .
Press MGN repeatedly to select “
AM
” or “
PM
” , or
24-hour time entry.
4
M Set N
5
Press M Menu N to exit.
Note:
R To check the current date and time setting,
temporarily change the unit to the fax mode by
pressing
M Fax N repeatedly (page 17).
R Your unit’s date and time will be used as the header
information for the following:
– When sending faxes (page 38).
R If the date and time is not set correctly, the other party
will receive an incorrect date and time as their
header. This may confuse the other party.
R The accuracy of the clock is approximately ±60
seconds a month.
To correct a mistake
Press MFN or MEN to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Caller ID service
The date and time will be automatically set according to
the received caller information.
R If the time has not previously been set, Caller ID will
not adjust the clock.
R You can turn this feature OFF (feature #226 on
Page 54).
20
2. Preparation