Panasonic KX-MB1500E Operating Instructions Manual Download Page 12

Page: 12 / 92

Do not extend the telephone line cord
(KX-MB1520/KX-MB1530 only).

Extension

telephone

adaptor

(not supplied)

* The pictured model is KX-MB1520.

Mains lead

Connect to Household Mains Supply
(220-240 V, 50 Hz).

Telephone line cord

Connect to telephone network.

[EXT]

socket

You can connect an answering machine or an
extension telephone. Remove the stopper if
attached, and take care of it appropriately.

Answering machine (not supplied)

*1 KX-MB1520/KX-MB1530 only

IMPORTANT NOTICE FOR THE USB
CONNECTION

DO NOT CONNECT THE UNIT TO A
COMPUTER WITH THE USB CABLE UNTIL
PROMPTED TO DO SO DURING THE SETUP
OF MULTI-FUNCTION STATION (page 22).

Note:

Do not place any objects within 10 cm of the right and
left sides of the unit.

Do not cover slots and openings on the unit. They are
provided for ventilation and protection against
overheating.

If another device is connected to the same telephone
line as this unit, you may experience unexpected
problems as this unit is not designed to share a
telephone line (KX-MB1520/KX-MB1530 only).

If you use the unit with a computer and your internet
provider instructs you to install a filter (

), please

connect it as follows (KX-MB1520/KX-MB1530 only).

* The pictured model is KX-MB1520.

1.7 Turning the power ON

Turn the power switch to the ON position (

1. Introduction and Installation

Summary of Contents for KX-MB1500E





























































































Search results

Summary of Contents for KX-MB1500E

Reviews:

Related manuals for KX-MB1500E

Brands by name

Popular brands

Panasonic KX-MB1500E, Operating Instructions Manual

Search results

Summary of Contents for KX-MB1500E

Reviews:

Related manuals for KX-MB1500E

Brands by name

Popular brands