Panasonic KX-FPG391C Operating Instructions Manual Download Page 97

Page: 97 / 122

10. Help

—————————————————————

NO ITEMS STORED

You tried to copy your phone book items to a
handset, but your phone book was empty.

—————————————————————

OPEN CABINET

CHECK FILM SLACK

OPEN CABINET

CHECK FILM TYPE

Please use genuine Panasonic replacement
film (page 10).

The ink film is slack. Tighten it (see step 5 on
page 15).

The fax machine is positioned near
appliances such as TVs or speakers which
generate an intense magnetic field.

—————————————————————

PAPER JAMMED

A recording paper jam occurred. Clear the
jammed paper (page 103).

—————————————————————

PHONE BOOK FULL

There is no space to store new items in the
phone book. Erase unnecessary items (page
41).

The phone book memory of the destination
handset is already full, or became full when
copying phone book items. Copying was
stopped. Press

{

STOP

}

to exit the mode

(page 42). Erase other stored items in the
destination handset phone book (page 41),
then try again.

—————————————————————

PLEASE WAIT

The unit is checking that there is no slack or
crease on the ink film. Wait for a moment
while the check is completed.

—————————————————————

RECORDING ERROR

The greeting message or voice memo you
recorded was under 1 second long. Record a
longer message.

—————————————————————

REDIAL TIME OUT

The other party’s fax machine is busy or has
run out of recording paper. Try again.

—————————————————————

REMOVE DOCUMENT

The document is jammed. Remove the
jammed document (page 106).

Press

{

STOP

}

to eject the jammed paper.

—————————————————————

SERIAL ERROR

There is something wrong with the unit.
Contact our service personnel. The base unit
will not work. So, if you make a call, use the
handset.

—————————————————————

SYSTEM IS BUSY

Radio communication between the handset
and the base unit is partially impaired.

More than one unit is in use, such as when
conducting an outside/intercom call. Try
again later.

Another user is listening to messages. Try
again later.

—————————————————————

TRANSMIT ERROR

A transmission error occurred. Try again.

If you send a fax overseas, try the following:
–

Use the overseas transmission mode
(feature #23 on page 76).

–

Add 2 pauses at the end of the telephone
number or dial manually.

—————————————————————

UNIT OVERHEATED

The unit is too hot. Stop using the unit for a
while and let the unit cool down.

FPG391C-PFQX2077ZA-en.book Page 95 Tuesday, August 31, 2004 10:12 AM

Summary of Contents for KX-FPG391C



























































































































Search results

Summary of Contents for KX-FPG391C

Reviews:

Brands by name

Popular brands

Panasonic KX-FPG391C, Operating Instructions Manual

Search results

Summary of Contents for KX-FPG391C

Reviews:

Brands by name

Popular brands