manualshive.com logo in svg

Panasonic KX-FPG391C, Operating Instructions Manual

Share
Download
Panasonic KX-FPG391C Operating Instructions Manual Download Page 7

Important Information

5

For Best Performance

For best performance

Battery charge

L

Place the handset on the charger for about 

6 

hours

 before initial use.

L

For details, see page 22.

Operating distance and noise

L

The base unit and handset use radio waves 
to communicate with each other.

For maximum distance and noise-free 
operation,

 we recommend the following:

Note:

L

If you use the handset near a microwave 
oven which is being used, noise may be 
heard from the receiver or the speaker. Move 
away from the microwave oven and closer to 
the base unit.

L

If you use the handset near another cordless 
phone’s base unit, noise may be heard. Move 
away from the other cordless phone’s base 
unit and closer to your base unit.

Environment

L

Keep the unit away from electrical noise 
generating devices, such as fluorescent 
lamps and motors.

L

The unit should be kept free from dust, high 
temperature and vibration.

L

The unit should not be exposed to direct 
sunlight.

L

Do not place heavy objects on top of the unit.

L

When you leave the unit unused for a long 
period of time, unplug this unit from power 
outlet.

L

The unit should be kept away from heat 
sources such as heaters, kitchen stoves, etc. 
It should not be placed in rooms where the 
temperature is less than 5 °C (41 °F) or 
greater than 35 °C (95 °F) (base unit)/40 °C 
(104 °F) (handset, charger unit). Damp 
basements should also be avoided.

L

Operating near 5.8 GHz electrical appliances 
may cause interference. Move away from the 
electrical appliances.

Recording paper

L

Store unused paper in the original packaging, 
in a cool and dry place. Not doing so may 
affect print quality.

Routine care

L

Wipe the outer surface of the unit with a soft 
cloth. Do not use benzine, thinner, or any 
abrasive powder.

1

Placing the unit away from electrical 
appliances such as a TV, personal computer 
or another cordless phone.

2

Placing the unit in a HIGH and CENTRAL 
location with no obstructions such as walls.

1

2

3

3

Raising the antennas vertically.

FPG391C-PFQX2077ZA-en.book  Page 5  Tuesday, August 31, 2004  10:12 AM

Summary of Contents for KX-FPG391C



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands