Panasonic KX-FPG391C, Operating Instructions Manual

Page: 87 / 122

8. Programmable Features
85
Note:
L
You can also program this feature with the
base unit (feature #06 on page 75).
Changing the maximum recording time for
each incoming message
“
1min
” , “
2min
” or “
3min
” (default): 1 minute to
3 minutes.
“
Greeting only
” : Only plays your greeting
message.
1. Press
{
MENU
}
.
2. Scroll to “
Initial setting
” by pressing
{v}
or
{e}
, then press the soft key
(
{
SELECT
}
).
3. Press the soft key (
{
SELECT
}
) at “
Set
answering
” .
4. Scroll to “
Recording time
” by pressing
{v}
or
{e}
, then press the soft key
(
{
SELECT
}
).
5. Press
{v}
or
{e}
repeatedly to select the
desired setting.
L
You can also select the recording time by
pressing
{
1
}
(1 minute),
{
2
}
(2 minutes),
{
3
}
(3 minutes) or
{
0
}
( “
Greeting
only
” ).
6. Press the soft key (
{
SAVE
}
).
7. Press
{
OFF
}
.
Note:
L
If you select “
Greeting only
” , the unit will
answer a call with the greeting message, and
then hang up. The unit will not record any
incoming messages.
L
You can also program this feature with the
base unit (feature #10 on page 75).
Setting remote operation code
1. Press
{
MENU
}
.
2. Scroll to “
Initial setting
” by pressing
{v}
or
{e}
, then press the soft key
(
{
SELECT
}
).
3. Press the soft key (
{
SELECT
}
) at “
Set
answering
” .
4. Scroll to “
Remote code
” by pressing
{v}
or
{e}
, then press the soft key (
{
SELECT
}
).
5. Enter a remote code using a 2-digit number
(00–99).
L
The default setting is “
11
” .
6. Press the soft key (
{
SAVE
}
).
7. Press
{
OFF
}
.
Note:
L
You can also program this feature with the
base unit (feature #11 on page 75).
Setting the mailbox 2 or 3 password
To prevent other users from retrieving your
messages, program a password for mailbox 2 or
3.
1. Press
{
MENU
}
.
2. Scroll to “
Initial setting
” by pressing
{v}
or
{e}
, then press the soft key
(
{
SELECT
}
).
3. Press the soft key (
{
SELECT
}
) at “
Set
answering
” .
4. Scroll to “
Set mailbox2&3
” by pressing
{v}
or
{e}
, then press the soft key
(
{
SELECT
}
).
5. Select the desired mailbox by pressing
{e}
( “
Mailbox2
” ) or
{v}
( “
Mailbox3
” ).
L
If the password has previously been
assigned to the mailbox, it is displayed.
6. Enter a 2-digit number (00–99).
L
If you entered a wrong number, press the
soft key (
{
CLEAR
}
), then enter the
password again.
7. Press the soft key (
{
SAVE
}
).
8. Press
{
OFF
}
.
To check the password
Repeat steps 1 to 5.
L
The password is displayed. When finished,
press
{
OFF
}
.
To erase the password
Press the soft key (
{
CLEAR
}
) in step 6, and
press the soft key (
{
SAVE
}
), then press
{
OFF
}
.
L
You will be able to access the mailbox without
entering the password.
Note:
L
You can also program this feature with the
base unit (feature #51 on page 78 and
feature #52 on page 78).
Changing the recording sound quality for
incoming messages
2 recording modes are available. “
:Standard
recording 14min
” (default) provides more
recording time (14 minutes) and standard sound
quality.
“
:Enhanced recording 6min
”
provides less recording time (6 minutes) but
clearer sound quality.
1. Press
{
MENU
}
.
2. Scroll to “
Initial setting
” by pressing
{v}
or
{e}
, then press the soft key
(
{
SELECT
}
).
3. Press the soft key (
{
SELECT
}
) at “
Set
answering
” .
FPG391C-PFQX2077ZA-en.book Page 85 Tuesday, August 31, 2004 10:12 AM