Panasonic KX-FPG391C Operating Instructions Manual Download Page 109

Page: 109 / 122

10. Help

107

Clean the document feeder rollers (

) and

rubber flap (

) with a cloth moistened with

isopropyl rubbing alcohol, and let all parts
dry thoroughly. Clean the scanner glass (

)

with a soft, dry cloth.

Caution:

Do not use paper products, such as
paper towels or tissues.

Close the front cover securely.

Connect the power cord and the telephone
line cord.

10.7 Thermal head
cleaning

If smudges or black/white lines appear on a
copied/received document, check whether there
is dust on the thermal head. Clean the thermal
head to remove the dust.

Disconnect the power cord and the
telephone line cord.

Open the front cover by pulling up the centre
part.

FPG391C-PFQX2077ZA-en.book Page 107 Tuesday, August 31, 2004 10:12 AM

Summary of Contents for KX-FPG391C



























































































































Search results

Summary of Contents for KX-FPG391C

Reviews:

Brands by name

Popular brands

Panasonic KX-FPG391C, Operating Instructions Manual

Search results

Summary of Contents for KX-FPG391C

Reviews:

Brands by name

Popular brands